Instructions for Multiple Computer users on a Network(for clients with a SpeedStream or Cisco DSL Bridge)

If you are a residential DSL client, then you most likely have a SpeedStream or Cisco Bridge. It converts the DSL signal coming from your wall jack to an ethernet signal that you plug into a Hub. This allows your computers to share access to the Internet and access to information between computers.

To get multiple computers on a Network or LAN to share Internet access, they must be assigned discretePublic or Private IP Addresses. You will need to know those addresses to complete this set up. If you are not sure what your IP Addresses are, call Internet Express' tech support (888-FAST DSL) and askfor them. Then continue to the next step.

1.

• Bring up the ZoneAlarm Control Window.
• Click on the Security button.

2.

• When this drop down box appears, set the Local slider to Medium or Low.
• Then click on the Advanced button.

3.

• The window to your right should appear.
• Click the the Add>> button and then select IP Address....

4.

• When the window to the right appears, put in a Descriptionfor your other computer (optional) then enter its IP Addressand press OK.
• Repeat this for as many IP Addresses (computers) that you have. The addresses that you add will be added to your local zone.
• When you have added all your IP's, you are done.